330 Durawood Aquawood – Waterbased Oil Stain

Click here to view technical data sheet

330 Durawood Aquawood is a penetrating water based oil stain containing powerful fungicides and UV absorbing pigments. It adds colour to timber, but allows the grain to show through. Its oil rich formula penetrates the timber to protect and enhance the colour. It is available in a range of popular timber colours. 330 Durawood Aquawood dries completely after 48 hours to give a surface that won’t mark clothing or skin and will not track when used on decks.

• UV inhibiting.
• Ready to use, no dilution required.
• Inhibits mould and mildew.
• Penetrating formula means there is no film to crack, peel or blister.
• Made in NZ for NZ conditions.

Coverage 12-18 m²/L for hardwoods and woods with low permeability (sand dressed timber with 80 grit sandpaper to improve penetration). 10-15 m²/L for soft & permeable woods. 5-6 m²/L for rough sawn timber.

Apply with brush.

Recoat in 12 hours.

4L and 10L only on special.